AQUAFOND SPECIAL
art. ACFOSE
5L can
Single-component water-based acrylic-polyurethane impregnating primer for wooden floors, indicated as a first coat of primer for a water-based painting system.
SUBSTRATE PREPARATION
The wooden floor must be well smoothed, filled and sanded, free from detaching parts such as oils, waxes, silicones. The substrate to be treated must be dry, with humidity of 8 – 12%. Room temperature from 15 to 25°C, relative humidity not exceeding 75%. After sanding, clean the entire surface with a vacuum cleaner and then with an antistatic cloth.
APPLICATION
Ambient and shake the product thoroughly before use. Apply evenly with a roller or brush. After approx. 12 hours at NC, after sanding, the finishing coat can be applied. Always check the humidity of the wood from 8 to 12%, the room temperature from 15 to 25°C and the relative humidity not exceeding 75%. Always use protective gloves. Always consult the technical and safety data sheet of the product.
SPECIFIC CHARACTERISTICS (NC):
SPECIFIC CHARACTERISTICS (NC):
APPEARANCE: milky liquid
VISCOSITY (@20°C; FORD #4): 25 – 35
DRY (%): 35 – 40
YIELD (G/M2): 80 – 100
DUST OUT (MIN): 90 – 120
TEMPERATURE OF USE (°C): +15 - +25
WALKABLE (HOURS): 12
APPLICATION/TOOLS: roller, brush
EQUIPMENT CLEANING: water, when the product is still fresh
STORAGE (MONTHS): 6
TEMPERATURE BETWEEN +5°C AND +25°C
DISPOSAL INFORMATION: Dispose of in accordance with applicable local and national regulations
PACKAGING: Overall units of 10 l (5 l drums each)
LIMITATIONS OF USE: Do not sand Protect from frost Given the great variety of wood essences on the market it is always advisable to carry out tests to check for any variations in the shade of the wood to be treated Do not apply in humid environments Avoid drafts Set the product at 20 °C before application Always use adequate individual protection systems Water-based
