ACQUALUX H2
art. ACH2
5L + 0.5L can
Matt - semi-gloss - glossy
Two-component water-based paint with high pedestrian resistance. Leaves the color of natural wood, easy to apply (roller or brush). Use: it can be applied directly to well-prepared wood, with just two coats a homogeneous silk effect finish is obtained. Very low VOC emissions
HOW TO USE:
SUBSTRATE PREPARATION
The wooden floor must be well smoothed, filled and sanded, free from detaching parts such as oils, waxes, silicones. The substrate to be treated must be dry, with humidity of 8 – 12%. Room temperature from 15 to 25°C, relative humidity not exceeding 75%. After sanding, clean the entire surface with a vacuum cleaner and then with an antistatic cloth.
APPLICATION
Ambient and shake the product thoroughly before use. Add the hardener (component B) to component A slowly while stirring and mix thoroughly. Wait approximately 10 – 15 minutes after mixing the two components before applying. It is recommended to filter the product before use. Apply with roller or brush. After about 12 hours in NC, the second coat can be applied after sanding with a 220 grit mesh. After sanding, clean the entire surface with a vacuum cleaner and then with an antistatic cloth. If necessary, apply a third coat, based on the type of wood used. Always check the humidity of the wood from 8 to 12%, the room temperature from 15 to 25°C and the relative humidity not exceeding 75%. Always use adequate individual protection systems. Always consult the technical and safety data sheet of the product.
SPECIFIC CHARACTERISTICS :
Appearance: milky liquid
Viscosity (20°C): 16 – 22
Gloss value: 65-30-10 GLOSS
Catalysis ratio (A:B): 10:1
Duration of the mixture (hours): 2
Yield (g/m2): 100 approx.
Dust free (min): 40 – 50
Use temperature (°C): +15 - +25
Walkable (hours): 24
Commissioning (days): 7
Application/Tools: roller, brush
Tool cleaning: water, when the product is still fresh
Storage (months): 6
temperature between +5°C and +25°C
Packaging: Total units of 11 l (5 l comp. A + 0.50 l comp. B)
Limitations of use: Do not apply in damp environments Keep away from frost Avoid draughts Always use adequate individual protection systems Set the product at 20°C before application Water based
