REOIL Oil
art. REOIL extension
5L can
SELF-CURING OIL FOR THE TREATMENT OF POLISHED WOODEN FLOORS
For the self-crosslinking impregnation treatment of polished wooden floors. 2 coats of application are sufficient to obtain a "paint" effect.
HOW TO USE:
SUBSTRATE PREPARATION; The surface must be perfectly smooth and free from dust and detaching parts such as lime residues, varnishes or waxes.
APPLICATION; Ambientate the product before use. Spread with a brush or roller. The quantity of product applied for each single application is very important. To obtain optimal results, as with any other coating, the principle of stratification is always valid, more thin and uniform coats guarantee better resistance and appearance. Always check the humidity of the wood from 8 to 12%, the room temperature from 15 to 25°C and the relative humidity not exceeding 75%. Always use adequate individual protection systems. Always consult the technical and safety data sheet of the product.
NOTE; An abundant application can, due to the effect of the superficial filming, prevent the evaporation of the solvents of the lower layers of the film, especially in the case of REOIL which has a very high concentration of urethane oil. The oleourethane finishes are products with natural polymerization and require some precautions to obtain an optimal result.
SPECIFIC CHARACTERISTICS (CN):; Appearance: Clear amber liquid
Viscosity (@20°C; Brookfield): 4800 - 5200
Yield (g/m2): 50 – 80
Drying time (hours): 6 – 10
Reapplicability (hours): 15 – 20
Walkability (hours): 24 – 36
Use temperature (°C): +15 - +25
Application/Tools; roller, brush
Tools cleaning: SE washing thinner
Product removal: SE washing thinner, with the product still fresh
Storage (months): 6
temperature between +5°C and +25°C
Disposal information Dispose of in accordance with applicable local and national regulations
Packaging: 5 l drums
Restrictions on use: Flammable product Ventilate the room while applying, avoiding draughts Do not apply in humid environments Always use adequate individual protection systems Set the product at 20°C before application
