Vinacoll 4000
art. VI4000
Bucket 25Kg
Suitable for bonding homogeneous PVC floors and coverings: carpets and needlepunched, coverings with expanded latex supports, jute and linoleum in sheets.
HOW TO USE:
SUBSTRATE PREPARATION
Always check the humidity of the substrate with suitable instruments. The humidity measurement of the substrate must be done in depth (approx. 2-3 cm) with a carbide vial hygrometer in order to exclude the possible presence of highly hygroscopic substances (such as pumice, vermiculite), which can release the humidity contained in them resulting in swelling of the floor. Do not lay on screeds that are not protected from possible rising damp (always insert an adequate vapor-tight sheath). Lean or dusty cementitious substrates must be consolidated with our VINACOLL 201 or ISOLATT 201/04, which promote perfect adhesion of the adhesive (see technical data sheet). Do not lay in rooms that are not equipped with windows or closures. Do not lay if the walls and ceilings of the room are not completely dry.
APPLICATION
Ambientate the product before use. Spread the adhesive only on the substrate using a suitable notched trowel, wait a few minutes (depending on the strength of the laying surface and the climatic conditions of the environment) for the adhesive to dry partially, which must be as dry as possible, but still in able to wet the back of the coating. Lay the covering by exerting uniform pressure on the entire surface in order to let out any air bubbles. Before gluing, always check the humidity of the screed which must be <2% (<0.5% anhydrite). Room temperature from 15 to 25°C, relative humidity not exceeding 75%. Always use adequate individual protection systems. Always consult the technical and safety data sheet of the product.
SPECIFIC CHARACTERISTICS :
Appearance: Pasty
Viscosity (@20°C; Brookfield): 5000 – 25000 Dry (%): 65 – 70
Yield (g/m2): 300 – 400
Workability time (minutes): 15 – 25
Use temperature (°C): +15 - +25
Walkability (days): 3 – 4 (based on ambient temperature)
Application/Tools: fine-toothed trowel
Tool cleaning: water, when the product is still fresh
Storage (months): 6
temperature between +5°C and +25°C
Disposal information Dispose of in accordance with applicable local and national regulations
Packaging: 25kg bucket
Limitations of use:Do not apply in humid environments
Fear the frost
Rigid materials, especially in the winter period, must be spread out in the premises
laying and left to rest to avoid any deformation from storage.
Ambient the product at 20°C before application
