Description
LT1 - Antiques K-2 Professional aging reagent for interior wood (parquet and furniture)
Antiques K-2 is an aging reagent for interior wood
Reagent capable of giving the artefacts an aging action. The particular chromatic effects are obtained in relation to the type of wood and the different dilutions of the product.
ANTIQUES K-2 is an alkaline solution capable of giving the artefacts a basic aging action, before receiving the impregnating treatment. It has a personal specificity, which combined with other products achieves particular and original aesthetic results. The aesthetic result is also in relation to the types of wood as well as the origin.
ANTIQUES K-2 applied pure on oak (after 12/24 hours) it gives a light aging effect. Ideal on oak, chestnut, elm, larch essences etc...
Advantages
- It gives a deep aging action to the wood.
- It can be diluted in water in all proportions with the possibility of obtaining different colours.
- It is possible to overlap it with other (aging) reagents to obtain particular and unique effects.
- Highlights the knots in the wood.
- Highlights the differences between the various slats.
Directions
Shake well before use. Operate at temperatures between +10°C and +30°C. Avoid applying the product on very hot supports. We recommend applying the product industrially with a roller or spray. However, it is possible to use the product on already laid floors if it is a running installation, acting in this way: if the effect you want to achieve is that given by a coat of reactive, to obtain an optimal result, we recommend applying two coats of ANTIQUES K-2 at 40% + 60% water.
Pour the solution into a tray and with the help of a brush, distribute the product on the floor in the direction of the grain, (making no more than one meter wide) evenly and using great care in the spreading operation . After the first application it is possible to smooth the surface with scotch brite or fine mesh.
After 12/24 hours, pass with 120/400 gr. sandpaper or green/black or spp scotch brite to smooth the surface and/or create any nuances. Vacuum and once the surface is clean and dry, proceed with the protective oil treatment.
PROTECT any surfaces that could be affected by the product.
ATTENTION: never pour ANTIQUES K-2 directly onto the wood, any drops or overlaps of product can create streaks or clearly mark the item.
BEFORE PROCEEDING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS ON AT LEAST 2/3 DIFFERENT STRIPS
Downloadable documents
TECHNICAL SHEET