AQUA PLAY 1 X-MATT water-based paint 30, 60 and 90 gloss Vermeister

VermeisterSKU: 506311 -X-Matt
No reviews

Price:
Sale price2.290,10 Kč

Tax included Shipping calculated at checkout

Stock:
In stock (30 units), ready to be shipped
Notify me when available
Area Required

Description

AQUA PLAY 1

506311 - 506300 - 506302 - 506318

AQUA PLAY 1 X-MATT Intense matt

AQUA PLAY 1 30 Matt

AQUA PLAY 1 60 Semi-gloss

AQUA PLAY 1 90 Brilliant

Tin 5LT

DESCRIPTION
Single-component water-based varnish available in 30, 60 and 90 gloss versions. Formulated with renewable raw materials AQUAPLAY 1 is characterized by the great ease of application and the extraordinary ability to spread which gives rise to aesthetically impeccable floors. Thanks to the S-XL technology AQUAPLAY 1 has good resistance to abrasion, scratching, scuffing and chemical resistance comparable to two-component systems. If used also as a base layer, it gives the wood a very warm tone.

APPLICATION
Before proceeding with the application, the surface must be treated with a Vermeister water-based primer. Alternatively, the product can be applied as a first layer. Shake the paint well and apply a first coat evenly. To ensure uniform application, the first coat of paint must be done against the grain and then crossed and stretched in the direction of the wood grain. After 4 hours, the floor can be sanded with an abrasive mesh (180-220), vacuumed and repainted with the same product.

MAINTENANCE
The maintenance of painted floors must be carried out exclusively with NEUTRAL DETERGENT and/or IDRONET. Do not use alcohol, ammonia and hard surface cleaners. For further details consult the MAINTENANCE SHEET.

NOTE
The application of single-component water-based products on solvent-based primers and varnishes could cause detachment phenomena if the sanding was done too lightly. We therefore recommend using two-component water-based paints from the Vermeister line in these cases. In the case of use on exotic and/or little-known woods, it is advisable to always carry out preliminary tests as on certain woods (e.g. IPE LAPACHO) the application of water-based varnishes directly on the wood or on substrates that are not perfectly insulating can cause strong redness of the film.
Do not apply the product below 10°C and above 30°C.
Do not put any leftover product back into the packaging!
Shake well before use – keep from frost
Product subject to the restrictions established by Dir.2004/42/EEC

Estimate shipping

Questions & Answers loading...

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

They might interest you

Recently viewed