Description
LK-factor Reactive capable of giving the products an ageing/greying action for wood
Customize your wood with the exclusive "LK FACTOR" reagent. This treatment gives an aging or walnut gray staining action, creating distinct color effects that depend on the wood and the dilution of the product. The LK FATTORE acid solution gives the wood an aged appearance on larch and a walnut gray stain on oak, ideal for essences such as oak, chestnut, elm, larch, etc.
Advantages
- Adds depth to the wood, creating an aging effect.
- It is completely dilutable in water, allowing for a wide range of shades.
- Can be overlaid with other reagents for unique and personalized effects.
- Highlights the knots and differences between the various parts of the wood.
Directions
Before use, shake well. Application is recommended at temperatures between +10°C and +30°C, avoiding very hot surfaces. Industrial application by roller or spray is recommended, but it can also be used on already laid floors, especially if laid.
To obtain an optimal effect, we recommend applying two coats of LK FACTOR diluted 40% with water, distributing evenly with a brush following the grain of the wood.
After 12/24 hours, sand the surface with 120/400 grit sandpaper or with green/black Scotch Brite to create shades. Vacuum up the dust and, once the surface is clean and dry, proceed with a protective oil treatment.
PROTECT surfaces that could be damaged by the product.
ATTENTION: Avoid pouring LK FACTOR directly onto the wood, to avoid obvious streaks or stains. Before applying on the entire surface, carry out tests on at least 2/3 different strips.