Description
Fattore Nel Tempo represents an aging reagent for wood suitable for internal use.
Reagent capable of giving the artefacts an aging/greying action. The particular chromatic effects appear based on the type of wood and the different dilutions of the product.
Fattore Nel Tempo is an acid solution that gives the artefacts a basic aging/greying action, preparing them for the subsequent impregnating treatment. Characterized by an individual specificity, when combined with other products, it achieves unique and original aesthetic results. The visual result is also influenced by the type and origin of the wood.
Time Factor applied directly on larch (after 12/24 hours) produces an aging effect, while on oak (after 12/24 hours) it generates a "honey grey" mordant. Ideal for oak, chestnut, elm, larch and other essences.
Benefits
- It gives a deep aging action to the wood.
- It is miscible in water in any proportion to obtain different shades.
- It can be overlapped with other (aging) reagents to create unique and particular effects.
- Highlights the knots in the wood.
- Highlights the differences between the various slats.
Directions
Shake well before use. Operate at temperatures between +10°C and +30°C. Avoid applying the product on very hot supports. We recommend applying the product industrially with a roller or spray. However, it is also possible to use it on already laid floors, especially if laid in a straight line. If you want an optimal reactive effect, we recommend applying two coats of Fattore Nel Tempo with a dilution of 40% reactive and 60% water.
Pour the solution into a tray and distribute it evenly on the floor following the direction of the wood grain, with a brush, paying attention to care when applying. After the first application, it is possible to smooth the surface with scotch brite or a fine mesh.
After 12/24 hours, pass with 120/400 grit sandpaper or green/black Scotch Brite or similar to smooth the surface and/or create any shades. Vacuum and, once the surface is clean and dry, proceed with the protective oil treatment.
Protect any surfaces that could be damaged by the product.
Attention: avoid pouring Fattore Nel Tempo directly onto the wood, as any drops or overlaps can create rings or obvious marks on the product.
Before proceeding on the entire surface, it is advisable to always carry out preliminary tests on at least 2/3 different strips.