Description
OP-2 factor aging reagent for interior wood with aging/greying action
Customize your wood with the unique "OP-2 FACTOR" reagent. This treatment imparts an aging or greyish patina, creating distinct color effects that depend on the wood and the dilution of the product. The acid solution of FATTORE OP-2 gives the wood an aged or antique walnut-grey appearance, ideal for essences such as larch, oak, chestnut, elm, etc.
Advantages
- Adds depth to the wood, creating an aging effect.
- It is completely dilutable in water, allowing for a wide range of shades.
- Can be overlaid with other reagents for unique and personalized effects.
- Highlights the knots and differences between the various parts of the wood.
Directions
Before use, shake well. Application is recommended at temperatures between +10°C and +30°C, avoiding very hot surfaces. Industrial application by roller or spray is recommended, but it can also be used on already laid floors, especially if laid.
To obtain an optimal effect, we recommend applying two coats of FATTORE OP-2 diluted 40% with water, distributing evenly with a brush following the grain of the wood.
After 12/24 hours, sand the surface with 120/400 grit sandpaper or with green/black Scotch Brite to create shades. Vacuum up the dust and, once the surface is clean and dry, proceed with a protective oil treatment.
PROTECT surfaces that could be damaged by the product.
ATTENTION: Avoid pouring FACTOR OP-2 directly onto the wood, to avoid obvious streaks or stains. Before applying on the entire surface, carry out tests on at least 2/3 different strips.