FX-25 algae remover eliminating the root of the problem

Solution with a broad and balanced spectrum of action against the green (moss/algae) that forms on floors and causes water stagnation, with the consequent risk of slipperiness.

FX-25 is a solution of alkyldimethylbenzyl-ammoniumchloride derivatives with a broad and balanced spectrum of action against greenery (moss/algae) which forms on floors and causes water stagnation, with the consequent risk of slipperiness.

FX-25 applied to surfaces penetrates the substrates, eliminating the roots of the problem. The product provides an effective treatment against algae on various contaminated absorbent building surfaces, such as: terracotta, wood, concrete, marble, stone, stoneware, etc...

Advantages

• Good anti-moss properties.
• The active ingredients of the product have a good affinity with the different products applied for protection.
• It works quickly.

Directions

Before starting, make sure you have everything you need to protect the operator. Shake before use.
Protect surrounding vegetation. Operate at temperatures between +10°C and +30°C. Avoid applying
the product on very hot supports, during strong winds or possible rain.

Before applying the FX-25 product, the surfaces must be clean and dry.

FX-25 should be applied to surfaces with a fleece or brush so that the active ingredients penetrate well. Leave to act for at least 12 hours. If you want greater effectiveness, rub with abrasive pads or discs using
the same product with water in a 1:1 ratio.

Subsequently rinse with clean water and, once the surface is dry, apply a second coat. After 2-3 hours it is possible to apply protective treatment.

Protect delicate surfaces that could come into contact with the product.

BEFORE PROCEEDING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS

TECHNICAL SHEET