Description
LEGNODUR A240/F
art. LEA240F
For gluing between tongue and groove of laminate or pre-finished floors to be laid floating (floating). Adhesive frequently used in carpentry for water-resistant gluing (windows, kitchen worktops, bathroom furniture). Class D3.
HOW TO USE:
SUBSTRATE PREPARATION
Always check the humidity of the substrate and wood with appropriate tools. Do not install on screeds that are not protected from possible rising humidity (always place an adequate vapor sealing sheath). Do not install in rooms that are not equipped with windows or doors. Do not install if the walls and ceilings of the room are not completely dry.
APPLICATION
Ambient the product before use. For gluing interlocking floors, spread the glue with a special container on the upper part of the male part in order to guarantee better waterproofing of the glued joints. Any glue leaks from the joints during installation can be removed with a damp cloth with fresh glue. Before gluing, always check the humidity of the wood with appropriate instruments (humidity must be between 7 and 11%). Ambient temperature from 15 to 25°C, relative humidity not exceeding 75%. Always use adequate individual protection systems. Always consult the product technical and safety data sheet.
SPECIFIC CHARACTERISTICS :
Appearance: Thick liquid
Viscosity (@20°C; Brookfield): 10000 – 18000
Dry (%): 52 – 56
Yield (g/m2): depending on use and thickness applied
Workability time (minutes): 8 – 10
Operating temperature (°C): +15 - +25
Walkability (hours): 10 – 12
Film hardening (hours): 3 - 4 hours (depending on use and thickness applied)
Application/Tools: Brush, special glue can
Cleaning of tools: Water, while the product is still fresh
Storage (months): 6
temperature between +5°C and +25°C
Disposal information: Dispose of in accordance with current local and national regulations
Packaging: 500 g jars.
Limitations of use: Do not apply in humid environments. Protect from frost. Ambient the product at 20°C before application.