Description
Oil-K toning oil for internal and external terracotta based on vegetable oils with hydro-oil-repellent properties
An innovative impregnating treatment based on vegetable oils, characterized by hydro-oil-repellent properties that give an intense and vibrant shade to the treated surfaces.
OIL-K is formulated with vegetable oils which guarantee superior protection compared to traditional oils, while maintaining a warm and bold color tone on the treated support.
This product is particularly suitable for terracotta, terracotta and concrete surfaces for both internal and external uses, thanks to its ability to penetrate deeply and provide long-lasting protection.
Advantages
- Effectively penetrates the treated surfaces.
- It gives a "wet effect" appearance, improving aesthetics.
- Easy to apply, ensuring uniform application.
- It does not become rancid over time, maintaining its properties over time.
- Preserves the breathability of the treated material.
Directions
Before use, shake the product well. The application must take place at temperatures between +15°C and +30°C, avoiding treating surfaces that are too hot or in conditions of strong wind or rain. Protect surrounding areas that could be damaged by contact with the product.
After carefully cleaning the surfaces to be treated and making sure they are completely dry, apply 1-2 coats of OIL-K with intervals of approximately 1-2 hours between one coat and the other. Distribute the product evenly using a brush, a wax spreader, a fleece or a cotton cloth and a brush.
ATTENTION: in case of excess product in some areas, perform a dry pass (within 3 hours of application) with a single brush equipped with a beige or red disc to make the surface uniform.< /p>
If the environment is well ventilated and the temperature is around 25°C, it is possible to complete the treatment with complementary products such as Linfocot and Sintesi 3/P, otherwise wait 2-3 days.
IMPORTANT: Temperatures above 15°C are necessary for the correct hardening of the natural oils contained in the product.
BEFORE TREATING THE ENTIRE SURFACE, ALWAYS CARRY OUT PRELIMINARY TESTS.
