Description
Oil Wax W-10 oleocerea for the treatment of internal wood to impregnate and protect the wood
A unique combination of vegetable oils and waxes designed to impregnate and protect the wood, keeping its natural breathability intact. Suitable for all wooden surfaces, whether brushed, planed, serrated or smooth, it gives a soft and bright surface finish.
Oil Wax W-10 is a set of vegetable oils and waxes specially formulated to impregnate and protect wood, maintaining its original breathability practically unchanged.
It can be used on any type of wooden surface, from brushed to smooth surfaces, thanks to its ability to deeply impregnate the wood and become an integral part of it.
It gives the wood a soft and bright surface finish, enhancing its aesthetic and tactile characteristics.
Advantages
- Highlights the softness and transparency of the wood.
- Easy to restore without altering the original color.
- Promotes a healthier environment due to its non-toxic nature.
- Excellent resistance to trampling and daily wear.
- Keeps the original breathability of the wood practically unchanged.
- It is free of electrostatic charges, ensuring a cleaner surface.
- Does not emit harmful substances during or after application.
- Formulated with 100% natural ingredients, such as oils and propolis.
- Increases the refraction of light, giving the wood a natural brightness.
Directions
Before use, be sure to mix the product well. The application must be carried out at temperatures between +15°C and +30°C, avoiding very hot surfaces or surfaces exposed to direct sunlight.
Drying times may vary depending on environmental factors such as temperature, ventilation and humidity.
Apply a thin layer of Oil Wax W-10 using a fleece, a brush or a wax spreader, maintaining a consumption of approximately 1 liter every 20/25 m2. After approximately 1-2 hours at 22°C, carry out a first pass with beige or white Scotch Brite and, if necessary, a single-brush machine or low speed polisher.
It is important to avoid wetting the surface during the operation and for at least 10 days after the treatment.
Two coats are usually sufficient, but on very compact woods only one coat may be necessary.
ORDINARY MAINTENANCE: Use Mistrall rinse aid detergent diluted 1-2% for each wash.
BEFORE APPLYING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS.