Description
INVISIBLE SHIELD is a specially formulated compound
with nanotechnological particles for the treatment of materials
absorbents (internal and external). The treatment gives a
oil-water repellent effect already a few hours after application.
This is made possible by the nanotechnology particles of the
product that allow it to penetrate very well into
depth. INVISIBLE SHIELD has been used for years with
success in the building industry for colourless, invisible and non-invisible impregnations
sticky, of building materials (such as:
fresh concrete, plaster, asbestos cement, concrete
porous, etc.). It is also effective for materials such as: bricks,
natural and artificial stones, paints based on natural pigments.
Surfaces treated with INVISIBLE SHIELD show up
slightly toned, non-sticky, vapor permeable
of water and stable to the alkaline effects of lime. It doesn't attack
rubbers and expansion joints. However, it is recommended
carry out a preliminary test.
¤Features
Appearance clear liquid
Typical odor of solvent
Application with short-haired roller, brush, spray,
immersion
Yield 100-900 g/m² depending on
support; to be checked from time to time
time
Storage stability 1 year (1)
Packages 1 - 5 Lt
Tool cleaning DILUENTE DNE
1 in closed original containers and at a temperature between +10° and +25°C
¤How to use
INVISIBLE SHIELD can be applied by spray, roller or brush
and/or immersion. The application must always be a lot
abundant and normally it is sufficient to spray twice
on the surface to be treated, one after the other, without
wait for the first one to dry. The best result is obtained
on very dry and absorbent surfaces; is still valid also on
funds still wet. INVISIBLE SHIELD consumption is running
of the absorbent power of the surface to be treated and in any case
varies from 100-900 gsm.
Application examples
* Asbestos cement: on average 100 g/m²
* Plaster: on average 700 g/m²
* Concrete: on average 400 g/m²
* Porous concrete: on average 900 g/m²