Description
Decerwax is a wax remover – degreaser – deoxidizer. Removes grease and smog deposits
Eliminates previous layers of oil and wax-based treatments, ensuring a complete dewaxing action. Removes grease deposits and air pollutants.
decerwax is a mixture of suitable hydrosolvents, inorganic alkalis, surfactants and special wetting agents with multiple characteristics. It effectively removes previous layers of oil and wax-based treatments, ensuring a complete dewaxing action. Removes grease deposits and air pollutants. On new floors, it facilitates the removal of oxidation (dark stains).
decerwax acts quickly on all types of surfaces: terracotta, clinker, stoneware, ceramics, concrete, etc... It must absolutely not be used on resistant or wooden floors.
Benefits
- Does not emit harmful substances during or after application.
- Eliminates oxidation (dark spots).
- High absorption capacity.
- Restores surfaces to their original state.
- It works quickly.
Directions
Before you begin, make sure you have everything you need to protect the operator. Shake well before use. Work at temperatures between +10°C and +30°C. Avoid applying the product on very hot surfaces, in case of strong wind or possible rain.
To remove old layers of oil, wax or resin, dilute 1 part of decerwax in 2-3 parts of water, apply the solution on the floor and leave to act for 10/20 minutes while always maintaining the damp surface. Pass the single-brush machine with abrasive disc for at least 1-2 minutes per square meter, simultaneously releasing water (possibly hot) from the tank, then vacuum before the product is reabsorbed by the material.
After this procedure, wash the surface with an acid solution, first checking its compatibility. Finally, rinse with clean water following the same process, but with a softer disc.
If you don't have a single disc machine, treat manually with an abrasive pad.
If you use the product as a deoxidizer on new floors with very persistent "dark marks", apply the pure product over the entire surface and leave it to act for a few hours or even a day, making sure it does not drip or damage other surfaces. The alkaline solution will tend to dry out (without compromising effectiveness).
Before the operation, pour a little water and decerwax on the floor and rub with abrasive discs. Protect delicate surfaces that could come into contact with the product.
BEFORE TREATING THE ENTIRE SURFACE, ALWAYS CARRY OUT PRELIMINARY TESTS.