Description
EC Ø V
One-pack polyurethane water-based varnish for wooden floors a
zero emissions of volatile organic compounds
¤Description
ECØ V is a single-component water-based paint for floors
in wood with high resistance to trampling and zero abrasion
emissions of volatile organic compounds. EC1 PLUS CERTIFICATE,
Ü-Mark compliance.
ECØ V can contribute to achieving the QI CREDIT 4.1
according to the GEV parameters dated 03 March 2009 because it is compliant
to the requirements of the LEED certification protocol (Leadership in
Energy and Environmental Design).
¤Features
Single component cure ratio
Application temperature +10°C ÷ +25°C
Roller, brush application
Possible water dilution
Yield 80-100 g/m²
Dust dry 40' (1)
Out of footprint 2 h (1)
Sandability 12 hours (1)
Overpaintable without
sanding
2-4 hours (1)
Gloss/Dullness LD: 60-70 gloss, OP: 20 gloss,
SUPER OP: 10 glosses (2)
Good chemical/physical resistance
Excellent coverage
Light wood oxidation
Storage stability 1 year (3)
5 L packs
Tool cleaning THINNER DNH 40
1 at 20°C and 65% RH
2 on 90 micron wet film hardened at 20°C and 65% RH for 7 days.
3 in closed original containers and at temperatures between +10°C and +25°C
¤How to use
ECØ V is a ready-to-use paint and should be applied to the floor
in wood previously filled, sanded and carefully
aspirated. It is possible after 2/4 hours from the application (in this
case without sanding) or after 24 hours (in this case sand
with abrasive paper or 220 grit mesh) apply the second coat
of ECØ V. If you want to apply a third coat, this must
be carried out following the timing described above; remains
however advisable sanding after each coat to obtain
a more uniform surface appearance and "softer" to the touch.
The application of ECØ V directly on wood containing
tannins must be preceded by a preliminary test. The
peculiar rheological characteristics of the paint allow
also spatula applications without leaving streaks and curbs.
Ordinary and/or extraordinary maintenance of floors
treated with ECØ V must be made with the products of the line
VELUREX (see relative technical data sheets).
If the product is available in stock, the goods will be delivered within 24/48 hours.
If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.