Adesiver Re 400/Extra adesivo per moquette e agugliati 5-12-20Lt - Eternal Parquet

Descrizione

ADHESIVES RE 400/EXTRA

Universal acrylic adhesive in water dispersion, with excellent

permanent tackiness for vertical installation

of profiles, resilient coatings on absorbent walls and substrates o

semi-absorbent

¤Description

ADESIVER RE 400/EXTRA is a thixotropic adhesive in dispersion

aqueous based on acrylic terpolymers characterized by a

very high dry residue, excellent spreadability, low content

of water. Specific for indoor installation of:

- carpet and needle punched with any reverse as long as

dimensionally stable;

- linoleum up to 3 mm thick;

- vinyl floors supported by felt;

- PVC flooring in rolls or squares;

- textile floors;

- semi-rigid vinyl;

- sheet rubber up to 3mm thick;

- PVC floors and walls;

- floors and walls in coconut with latex support;

- polystyrene floors and walls.

¤Features

Single component cure ratio

Creamy look

Ivory white colour

Application temperature +10°C ÷ +25°C

No. 1-3 notched trowel application

Waiting time 10-25 minutes (1)

Maximum open time 30 minutes (1)

Walkability time after about 2-4 hours (1)

Commissioning after approx. 48-72 hours (1)

Yield 250-350 g/m² depending on

background.

Possible water dilution

Storage stability 2 years (2)

Packs 5 - 12 - 20 Kg

Cleaning tools water (with fresh adhesive)

1 at 20°C and 65% RH

2 in closed original containers and at temperatures between +10°C and +25°C

¤Laying conditions

◊ Background

dry, healthy, non-dusting and not overly rough.

◊ Substrate humidity

2.0% max for cement substrates

1.7% max for cement substrates with heating

radiant

0.5% max for anhydrite substrates

0.2% max for anhydrite substrates with heating

radiant

¤How to use

FLOOR APPLICATION

Substrate preparation: dry but dust-free substrates

must be primed with PRYMER W, PRYMER SF 1105

PRYMER PUB 77 or CHIMIGRIP suitably diluted (see

relative technical data sheets) and subsequently shaved with the products

of the RASOCHIM line (see relative technical sheets).

Cement substrates with too high residual humidity

should be primed with: PRYMER EPOX WETT, PRYMER WB 328

S, PRYMER SF 1105 and PRYMER PUB 77 (see relative sheets

techniques), sandblasted and subsequently shaved with the products of

RASOCHIM line (see relative technical sheets).

Semi-absorbent or non-absorbent substrates must be

always shaved with the products of the RASOCHIM line (see

relative technical data sheets), after preparation of the surface

with CHIMIGRIP as an adhesion promoter (see relative sheet

technique).

Do not lay on substrates that are not insulated from any rising damp

humidity (crawl spaces without vapor barrier, damp walls, etc...)

Installation on suitable substrates: apply the adhesive on the substrate

using the special notched trowel, working it in order to

incorporate any remaining powder.

Wait for the glue to dry (at least 10 minutes)

and proceed with the drafting of the squares or sheets. After

the final positioning exercise on the entire surface a

even pressure to ensure complete contact

of the adhering with the glue and to favor the elimination of

any air pockets.

WALL APPLICATION

Wall preparation: the surface on which you will go

to lay the coating must be absorbent, clean, not

friable, free from fats, oils, waxes, etc.

Dry but dust-free walls must be primed with

PRYMER W, PRYMER SF 1105 and PRYMER PUB 77 appropriately

diluted (see relevant technical data sheets).

Installation on a suitable wall: apply the adhesive on the wall

using the special notched trowel, working it in order to

incorporate any remaining powder.

Wait for the glue to dry (at least 10 minutes)

and proceed with the application of the squares or sheets. After

the final positioning exercise on the entire surface a

even pressure to ensure complete contact

of the adhering with the glue and to favor the elimination of

any air pockets.

Note

Always remove the coverings to be glued from the packaging

hour before laying in order to discharge tensions and homologate them

to the environmental climatic conditions. Any changes in the

times are attributable to different absorptions of the substrate.

Some tires may be polluted by substances

release agents or paraffins. A cleaning is therefore recommended

preventive with ACETONE THINNER.

If the product is available in stock, the goods will be delivered within 24/48 hours.

If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.

Adesiver Re 400/Extra adhesive for carpets and needle punched 12-20Lt

Name: Adesiver Re 400/Extra adhesive for carpets and needle punched 12-20Lt
Brand: Chimiver
SKU: Adesiver Re 400/Extra-5 Lt
Price: 3163.44 CZK
Availability: OutOfStock

SKU: Adesiver Re 400/Extra-5 Lt

3.163,44 Kč

Tax included. Shipping calculated at checkout.

Hurry up, only 1 item left in stock.

Caricamento prodotti accessori...

Nessun prodotto accessorio disponibile

Calcola le spese di spedizione

Country/region

Postal/ZIP code

Pagamenti sicuri

I tuoi dati di pagamento vengono elaborati in modo sicuro. Non memorizziamo i dati della tua carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Descrizione

ADHESIVES RE 400/EXTRA

Universal acrylic adhesive in water dispersion, with excellent

permanent tackiness for vertical installation

of profiles, resilient coatings on absorbent walls and substrates o

semi-absorbent

¤Description

ADESIVER RE 400/EXTRA is a thixotropic adhesive in dispersion

aqueous based on acrylic terpolymers characterized by a

very high dry residue, excellent spreadability, low content

of water. Specific for indoor installation of:

- carpet and needle punched with any reverse as long as

dimensionally stable;

- linoleum up to 3 mm thick;

- vinyl floors supported by felt;

- PVC flooring in rolls or squares;

- textile floors;

- semi-rigid vinyl;

- sheet rubber up to 3mm thick;

- PVC floors and walls;

- floors and walls in coconut with latex support;

- polystyrene floors and walls.

¤Features

Single component cure ratio

Creamy look

Ivory white colour

Application temperature +10°C ÷ +25°C

No. 1-3 notched trowel application

Waiting time 10-25 minutes (1)

Maximum open time 30 minutes (1)

Walkability time after about 2-4 hours (1)

Commissioning after approx. 48-72 hours (1)

Yield 250-350 g/m² depending on

background.

Possible water dilution

Storage stability 2 years (2)

Packs 5 - 12 - 20 Kg

Cleaning tools water (with fresh adhesive)

1 at 20°C and 65% RH

2 in closed original containers and at temperatures between +10°C and +25°C

¤Laying conditions

◊ Background

dry, healthy, non-dusting and not overly rough.

◊ Substrate humidity

2.0% max for cement substrates

1.7% max for cement substrates with heating

radiant

0.5% max for anhydrite substrates

0.2% max for anhydrite substrates with heating

radiant

¤How to use

FLOOR APPLICATION

Substrate preparation: dry but dust-free substrates

must be primed with PRYMER W, PRYMER SF 1105

PRYMER PUB 77 or CHIMIGRIP suitably diluted (see

relative technical data sheets) and subsequently shaved with the products

of the RASOCHIM line (see relative technical sheets).

Cement substrates with too high residual humidity

should be primed with: PRYMER EPOX WETT, PRYMER WB 328

S, PRYMER SF 1105 and PRYMER PUB 77 (see relative sheets

techniques), sandblasted and subsequently shaved with the products of

RASOCHIM line (see relative technical sheets).

Semi-absorbent or non-absorbent substrates must be

always shaved with the products of the RASOCHIM line (see

relative technical data sheets), after preparation of the surface

with CHIMIGRIP as an adhesion promoter (see relative sheet

technique).

Do not lay on substrates that are not insulated from any rising damp

humidity (crawl spaces without vapor barrier, damp walls, etc...)

Installation on suitable substrates: apply the adhesive on the substrate

using the special notched trowel, working it in order to

incorporate any remaining powder.

Wait for the glue to dry (at least 10 minutes)

and proceed with the drafting of the squares or sheets. After

the final positioning exercise on the entire surface a

even pressure to ensure complete contact

of the adhering with the glue and to favor the elimination of

any air pockets.

WALL APPLICATION

Wall preparation: the surface on which you will go

to lay the coating must be absorbent, clean, not

friable, free from fats, oils, waxes, etc.

Dry but dust-free walls must be primed with

PRYMER W, PRYMER SF 1105 and PRYMER PUB 77 appropriately

diluted (see relevant technical data sheets).

Installation on a suitable wall: apply the adhesive on the wall

using the special notched trowel, working it in order to

incorporate any remaining powder.

Wait for the glue to dry (at least 10 minutes)

and proceed with the application of the squares or sheets. After

the final positioning exercise on the entire surface a

even pressure to ensure complete contact

of the adhering with the glue and to favor the elimination of

any air pockets.

Note

Always remove the coverings to be glued from the packaging

hour before laying in order to discharge tensions and homologate them

to the environmental climatic conditions. Any changes in the

times are attributable to different absorptions of the substrate.

Some tires may be polluted by substances

release agents or paraffins. A cleaning is therefore recommended

preventive with ACETONE THINNER.

If the product is available in stock, the goods will be delivered within 24/48 hours.

If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.