Krypto H-6 is a strong protector for internal and external terracotta, stone and concrete

Protective for floors, coverings, kitchen or bathroom tops and shower cubicles, made for marble, terracotta, unglazed clinker, concrete and in particular on all non-polished natural stones.

KRYPTO-H6 represents the outcome of careful research that makes use of a new generation of silane fluorinated acrylic copolymers, equipped with unique hydro-oil-repellent characteristics, to protect construction materials. It guarantees a longer life of the product, excellent protection of the treated support and, at the same time, acts as an anti-writing.

KRYPTO-H6 is an ideal protector for floors, coverings, kitchen or bathroom worktops and shower cubicles, on terracotta, unglazed clinker, concrete and above all on all non-polished natural stones (porphyry, marble, granite, slate, travertine and sandstone). The external treatment gives surfaces subject to heavy traffic extraordinary resistance to abrasion.

IMPORTANT: Before using the product, check that the manufacturers of the materials do not advise against its use.

Advantages

• Prevents the adhesion of chewing gum to the treated surface.
• Does not alter the color of the treated artefacts.
• Does not form surface films.
• Excellent water-oil-repellent properties.
• Efficient anti-writing action.
• Stability in the permeability of the material to water vapor and gases.
• Deep penetration for long-lasting.
• In humid conditions, it develops anti-slip properties.
• Significantly reduces the formation of mosses, lichens and yeasts.
• Protection against degradation caused by freeze/thaw cycles.
• Can be used as a final layer on other treatments.

Directions

Shake well before use. Work at temperatures between +10°C and +30°C. Avoid applying the product on very hot supports, during strong winds or rain. For the application of KRYPTO-H6, we recommend the use of a wax spreader, a cotton cloth, a brush or a low pressure sprayer. On vertical surfaces, apply the product wet on wet; on floors, however, wait 30-60 minutes between one application and another. On particularly porous or rustic surfaces, an additional layer may be necessary. This type of protection allows the elimination of all future graffiti with a simple wash using detergent products and a pressure washer.

However, protect the product for at least 24 hours after completing the application.

KRYPTO H6 can be applied as a final layer on treatments with KIPTON HS or FOLLET-C (see sheets).

IMPORTANT: Do not apply other products (impregnation or waxes) over the treatment with KRYPTO H6, as they will be repelled without adhering to the surface.

ORDINARY MAINTENANCE: For washing, use detergents such as Mistrall or Oil & Clean (see sheets).

EXTRAORDINARY MAINTENANCE: About once every 1-3 years with Krypto H6.

BEFORE APPLYING ON THE ENTIRE SURFACE, ALWAYS DO A TEST ON A SMALL AREA TO ASSESS THE COMPATIBILITY AND EFFECTIVENESS OF THE PRODUCT.

TECHNICAL SHEET