Description
Neocot protective finishing wax for interiors and exteriors reinforces stain-resistant properties
It adds a shiny appearance to the product and at the same time strengthens the stain-resistant properties, guaranteeing longer-lasting basic protection.
NEOCOT is a water-based finish that gives the product a shiny appearance and, at the same time, strengthens the stain-resistant properties, prolonging the life of the basic protection. Can be used as a finish and maintainer after the external impregnating treatment, it simplifies maintenance operations.
NEOCOT completes and increases the stain-proof protection of external surfaces. Ideal for terracotta, terracotta, clinker, concrete, non-polished natural stone and rough surface stoneware.
IMPORTANT: For ordinary cleaning, avoid alcohol, acidic, solvent or ammonia detergents.
IMPORTANT: Always check whether the manufacturers of the materials advise against the use of the product before use.
Advantages
- Simple to clean.
- Prolongs the duration of treatment.
- Greater resistance to water and oils.
- Easy to apply.
- It guarantees a pleasant shiny appearance.
- Uniform results.
- Does not contain harmful substances during or after application.
- Pleasantly scented.
- Dries quickly.
- Protects against damage caused by freeze and thaw cycles.
Directions
Shake before use. Apply at temperatures between +10°C and +30°C, avoiding very hot surfaces, strong winds or imminent rain.
SOME EXAMPLES OF TREATMENT:
1) After the Follet-C impregnator, apply 1-2 coats of NEOCOT.
2) After the Kripton HS impregnator, apply 1 -2 coats of NEOCOT.
After checking that the surfaces treated with the basic products are dry and uniform (about 2 hours later), apply a first coat of NEOCOT evenly with a wax spreader or a cotton cloth with brush. Leave to dry for 1-2 hours and, if necessary, apply a second hand in the same way.
For raw porcelain stoneware, apply directly without base primers, following the same methods.
If you want a less shiny finish, you can mix it with Follet-C (see sheet) up to a maximum ratio of 1:1.
As an extraordinary maintainer, it is recommended to apply it every 8-12 months. For more frequent maintenance, dilute it up to 50% in water.
For ordinary maintenance, use Mistrall (see data sheet) diluted 1-2% in water for each wash. After treatment, protect from water and bad weather for at least 24 hours.
BEFORE APPLYING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS.
