P-300/AD specific detergent for descaling acids and rust removers

Suitable for a wide range of materials, this specific detergent is ideal for eliminating whitish efflorescence, lime encrustations, cement, rust stains, plaster, grout and whitewash residues.

P-300/AD is used on a wide range of materials, including terracotta, terracotta, ceramic, porcelain stoneware, granite, clinker, etc... Use on marble is not recommended and polished natural stones.

Advantages

• It does not produce fumes or unpleasant odors.
• Its cleansing action is effective without being too aggressive.
• The effectiveness in removing encrustations is proportional to the contact time.
• It has a pleasant fragrance.
• It can be diluted in different proportions.

Directions

Before use, shake the product well. It is recommended to always operate at temperatures between +5°C and +30°C, avoiding direct exposure to sunlight during the hottest months.

Distribute P-300/AD on the surface, previously diluted in water, based on the type of impurity to be removed. Leave to act for approximately 10 minutes, a time determined based on the preliminary tests carried out. Subsequently, rub vigorously with a hard brush or a scotch brite suitable for the treated material and remove everything using a wet vacuum cleaner. Finally, rinse thoroughly with clean water.

Avoid using the product on polished marble or natural stone surfaces sensitive to acids.

Protect any surfaces (such as wood, zinc, copper, etc...) that could come into contact with the acidic product and therefore suffer damage.

Recommended dilutions:

- Dilute 1 part of the product in 2 parts of water to remove rust on granite, gneiss, serizzo, etc...

- Dilute 1 part of the product in 4 parts of water for washing terracotta, granite, gneiss surfaces, etc...

- Dilute 1 part of the product in 9 parts of water for washing surfaces in porcelain stoneware, ceramic, quartzite, etc...

BEFORE APPLYING THE PRODUCT ON THE ENTIRE SURFACE, ALWAYS CARRY OUT PRELIMINARY TESTS.

TECHNICAL SHEET