Rapid ready parquet 1Kg

art. PAPRRA

Two-component A 0.9kg + B 0.1kg

Water-free two-component polyurethane adhesive for rapid bonding of any type of wooden floor on cementitious substrates or on pre-existing non-absorbent floors.

HOW TO USE:

SUBSTRATE PREPARATION
Always check the humidity of the substrate and of the wood with suitable instruments. The humidity measurement of the substrate must be done in depth (approx. 2-3 cm) with a carbide vial hygrometer in order to exclude the possible presence of highly hygroscopic substances (such as pumice, vermiculite), which can release the humidity contained in them resulting in swelling of the floor. Do not lay on screeds that are not protected from possible rising damp (always insert an adequate vapor-tight sheath). Lean or dusty cementitious substrates must be consolidated with our PRIMERS (PU, POLY ECO, PS39 or RECOLPOX 05/ED), which promote adequate adhesion of the adhesive (see technical data sheet). Do not lay in rooms that are not equipped with windows or closures. Do not lay if the walls and ceilings of the room are not completely dry.

APPLICATION
Ambientate the product before use. Pour the PARQUET READY RAPID component (B) into the container of the PARQUET READY RAPID component (A), mixing it carefully until a homogeneous and uniform paste is obtained. The paste thus obtained is spread with a suitable No. 6 wide-toothed spatula on the substrate which must be compact, dry, clean, free from detaching parts such as wall paint residues, powders, waxes or the like. The product must not be diluted. Before gluing, always check the humidity of the screed which must be <2% (<0.5% anhydrite). Room temperature from 15 to 25°C, relative humidity not exceeding 75%. Always use adequate individual protection systems. Always consult the technical and safety data sheet of the product.

SPECIFIC CHARACTERISTICS :
Appearance: Pasty

Viscosity (@20°C; Brookfield): 35000 – 120000

Yield (g/m2): 1000 – 1400

Workability time (minutes): 10 – 15

Operating temperature (°C):: +15 - +25

Walkability (days): 2 – 3

Sanding (hours): 8 – 10

Application/Tools: No. 5 wide-toothed trowel

Tool cleaning: SE, with the product still fresh

Product removal: PULITORE PR, with the product still fresh

Storage (months): 6

temperature between +5°C and +25°C

Disposal Information: Dispose of in accordance with applicable local and national regulations

Packaging: Total units of 1 kg (comp. A 0.9 kg + comp. B 0.1 kg)

Limitations of use: Rapid product; short workability time Do not apply in damp environments Do not glue the sides of the planks Ventilate the room during installation, however avoiding drafts Always use adequate individual protection systems Set the product at 20°C before application