Perlage Oro is a self-polishing protector for interior painted parquet

An innovative wax, available in a glossy or satin finish, which guarantees resistant protection and a bright appearance to painted wooden surfaces.

PERLAGE ORO represents a novelty in the field of waxes for painted wood. Thanks to its advanced formulation and thin layering, it effectively nourishes and protects varnished parquet surfaces, protecting them from wear and dirt.

This formulation provides subtle but long-lasting protection, giving painted wooden surfaces a neat and shiny appearance.

IMPORTANT: It is recommended to avoid the use of alcohol, acidic, solvent or ammonia detergents for ordinary cleaning.

Advantages

• High adhesion.
• Easy to apply.
• Preserves the paint from wear.
• Does not emit harmful substances during or after application.
• It gives a waxy and well-groomed appearance to surfaces.
• Provides additional protection to varnished parquet.
• Does not require polishing.
• Restores the original shine of worn varnished parquet.
• Releases a pleasant scent into the environment.

Directions

Before use, shake the product well. It is recommended to apply at temperatures between +10°C and +30°C, avoiding surfaces that are too hot.

After thorough cleaning with a neutral, brightening detergent such as Mistrall, on a dry floor, evenly and continuously spread a thin coat of PERLAGE ORO using a cotton or soft microfibre cloth with a suitable brush. Leave to dry for at least 1 hour.

For large surfaces, we recommend paying attention during application, distributing the product over approximately one square meter at a time and following the direction of the wood grain from one side of the room to the other to avoid overlapping.

It is possible to apply a second coat in the same way as for the first use.

Choose the glossy or satin version of PERLAGE ORO based on the desired paint finish.

ORDINARY MAINTENANCE: For each wash, use Mistrall rinse aid detergent diluted at 1-2% (see technical data sheet).

EXTRAORDINARY MAINTENANCE: About once a year, with PERLAGE ORO (glossy or satin version).

BEFORE APPLYING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT PRELIMINARY TESTS.

TECHNICAL SHEET