Description
TWO-COMPONENT PAINT
Matt - semi-matt - semi-gloss - glossy
Two-component water-based paint with high resistance
pedestrian. Leaves the color of natural wood, easy
application (roller or brush). Use: can be applied
directly on the well prepared wood, with only two hands yes
they obtain homogeneous silk effect finishes. Very low
VOC emissions
HOW TO USE:
SUBSTRATE PREPARATION
The wooden floor must be well sanded, filled and
sanded, free of detaching parts such as oils, waxes, silicones. The
substrate to be treated must be dry, with humidity 8 –
12%. Ambient temperature from 15 to 25°C, relative humidity not
greater than 75%. After sanding, clean the entire surface
with a vacuum cleaner and then with an antistatic cloth.
APPLICATION
Ambient and shake the product thoroughly before use.
Add the hardener (component B) to component A
slowly under stirring and mix thoroughly.
Wait about 10 – 15 minutes after mixing the two
components before application. It is recommended to filter the
product before use. Apply with roller or brush. After
after about 12 hours at NC, the second can be drawn up
hand after sanding with 220 grit retina. After
sanding clean the entire surface with a vacuum cleaner e
then with an antistatic cloth. If necessary
apply a third coat, based on the type of wood used.
Always check the humidity of the wood from 8 to 12%.
ambient temperature from 15 to 25°C and relative humidity not
greater than 75%. Always use adequate protection systems
individual. Always consult the technical and safety data sheet
of the product.