Deep action water repellent

INDICATIVE CONSUMPTION FROM 5 TO 10 SQM / 1 LITER of mixture

Two-component: 2 cans of 1 liter

What is it

Aqueous emulsion of siloxane oligomers, wetting agents, emulsifiers and aggregating resins, with high penetration capacity into porous substrates and high chemical inertness. Two-component concentrated product to be mixed and diluted in water at the time of use.

What it does

The performances refer to the Comp. 1 + Comp. 2 mixture

Reduces capillary rise and the absorption of water through the material, thus facilitating its drying • Avoids the formation of dark stains, efflorescence and mould. Prevents the penetration of water-soluble dirt, allowing it to be removed.

Maintains the original breathability of the material without forming a film • The water-repellent effect appears 1-2 days after its application; maximum performance is reached after approximately 5-7 days • Any subsequent treatments can be carried out at least 2 days after the application of the IPA 16 mixture.

How to use

Pour 1 liter of Component 1 (white) into 8/13 liters of clean water, stirring well, then pour 1 liter of Component 2 (amber) and mix again for approx. 1 minute • This proportion must be maintained for any quantity of mixture you wish to obtain • The IPA 16 mixture obtained must be used within 12 hours of preparation • It is applied on clean, dry or uniformly damp surfaces with a brush, pad, liquid spreader or spray with manual sprayers (do not spray it!), spreading it evenly and removing excess.