Description
Kripton HS is a protectant for internal and external terracotta, stone and concrete
Water-oil-repellent protective treatment for all internal and external siliceous-based reactive mineral surfaces, such as terracotta, terracotta, clinker (unglazed), cement, non-polished natural stone and sandstone.
KRIPTON HS is a product based on oligomeric fluoroalkylsiloxanes which, once applied, gives a neutral and opaque tone to surfaces, demonstrating water-oil-repellent properties.
KRIPTON HS is used as a protectant on all internal and external silica-based reactive mineral surfaces, such as terracotta, terracotta, clinker (unglazed), concrete, non-polished natural stones (travertine, marble , granite, porphyry, slate) and sandstone (pietra serena).
IMPORTANT: Before using the product, make sure that the manufacturers of the materials do not advise against its use.
Advantages
- No chromatic alteration of the treated materials.
- Stability to water vapor permeability.
- Completely opaque surfaces.
- High resistance to UV rays.
- Excellent oleophobic protection.
- Long-lasting protection.
- It does not contain harmful substances either during or after application.
- Quick drying.
- External protection against degradation caused by freeze/thaw cycles.
Directions
Shake well before use. Apply to clean, dry surfaces with a cotton cloth, mop, fleece or wax spreader (usually 1-3 coats are sufficient). Wait 1-2 hours between one coat and the other, considering the times in relation to the temperature.
For the complete internal treatment, complete with a Sintesi 3/P finishing wax (see sheet). If you want to maintain a neutral tone, you can use Linfocot (see sheet) as an intermediate protectant.
For greater protection of external surfaces, we recommend applying 1-2 coats of Neocot (see sheet).
Protect the newly treated surface from rain for at least 24 hours.
ORDINARY MAINTENANCE: For washing, use detergents such as Mistrall or Oil & Clean (see sheets).
EXTRAORDINARY MAINTENANCE: Approximately once every 1-2 years, use Cottolux for internal surfaces or Neocot for external ones (see sheets).
BEFORE APPLYING ON THE ENTIRE SURFACE, ALWAYS DO A TEST ON A SMALL AREA TO ASSESS THE COMPATIBILITY AND EFFECTIVENESS OF THE PRODUCT.
