Maxi Fondo SF2C fast drying polyurethane primer for parquet 5+5Lt

AdesivSKU: Maxi Fondo SF2C
No reviews

Price:
Sale price35.974 Ft

Tax included Shipping calculated at checkout

Stock:
In stock (30 units), ready to be shipped
Notify me when available

Description

HIGHLY HIGH TWO-COMPONENT POLYURETHANE BASECOAT

COVER
Fast drying two-component polyurethane primer e
excellent sandability, suitable for quality finishes in
short times.
HOW TO USE:
SUBSTRATE PREPARATION
The substrate to be treated must be dry, with humidity 7 –
11%. Ambient temperature from 15 to 25°C, relative humidity not
greater than 75%. It will need to be sanded with 180 grit.
After sanding, clean the entire surface with a vacuum cleaner e
then with an antistatic cloth.
APPLICATION
Ambient and shake the product thoroughly before use.
Prepare only the amount of product needed using some
clean containers. Mix evenly with a stick
cleaned the two components (1 part comp. A + 1 part comp. B),
leave the product to pre-react for about 10 minutes. Filter the
product. Apply evenly with a roller or brush. After
approximately 12 hours in CN you can proceed with the finish with ADEBRIL
2C or ADEBRIL MONO (see technical data sheet) after sanding
with 180 grain and cleaning of the entire surface with a vacuum cleaner e
then with an antistatic cloth. Always check the
wood humidity from 8 to 12%, room temperature from 15 to
25°C and relative humidity not exceeding 75%. Always use
adequate individual protection systems. Always consult the
technical and safety data sheet of the product.

Estimate shipping

They might interest you

Recently viewed