Description
SOLVENT FREE TWO-COMPONENT EPOXY PRIMER 2:1
Consolidating resin for dusty cement screeds; for
the treatment against residual moisture for floors
moist; for anchoring and impregnating substrates in
chemically aggressive environments or places. For
for gluing, use only our glues
two components.
SUBSTRATE PREPARATION
Always check the humidity of the substrate with suitable ones
tools (max 3 – 4%). The substrate to be treated must be
compact and free of detaching parts. Any defects in the
surface, such as cracks or cracks should be treated by kneading
fine washed sand (not marine) with PRIMER HE. To verify
always the presence of an adequate vapor barrier.
APPLICATION
Ambient at 20°C before use. Mix the two
components accurately (two parts by volume of the component
A and one part by volume of component B) with stirrer
electric (scraping the walls well). One coat should be applied to
brush or roller in an abundant and homogeneous way.For
to ensure greater adhesion of the adhesives, spread a layer
of fine dry sand (not marine) on the last coat of
PRIMER HE still fresh. After drying, before
gluing remove excess sand not anchored. The
however, the substrate must be clean and dry on the surface
and free from residues in general. Ambient temperature from 15 to
25°C, relative humidity not exceeding 75%. Always use
adequate individual protection systems. Always consult the
technical and safety data sheet of the product.
NOTE
Always make sure there is an adequate vapor barrier.
Prepare only the amount of primer needed, using only
clean containers. The reaction develops heat. The greater the
amount of product that reacts, the higher the temperature
developed and consequently the workability time decreases
noticeably.
NB at 30°C room temperature (summer) we recommend
catalyze a maximum of 2kg of component A with 1kg of
component B. High ambient temperatures reduce
significantly the time of use of the mixture for application
(about 15 minutes)
Estimate shipping
Domande e Risposte
Hai una domanda?
Fai una domanda su questo prodotto.
They might interest you


Primer PA 35 consolidating resin against humidity for cement screeds 10Kg
Sale price41.347 Ft
In stock, 30 units

Primer PA400 One-component solvent-based polyurethane resin 10Kg
Sale price39.315 Ft
In stock, 25 units

Glue Pelpren RR two-component polyurethane adhesive for quick repairs
Sale price6.204 Ft
In stock, 29 units

Pavilast 3C three-component waterproof primer for non-absorbent surfaces 5Kg
Sale price24.792 Ft
In stock, 30 units
Parquet Pronto Rapid Polyurethane adhesive for small quick repairs
Sale price7.860 Ft
In stock, 10 units
Prymer SF 1105 A+B two-component epoxy primer blocks humidity 2 cans of 10L Chimiver
Sale price201.976 Ft
In stock, 29 units

Pelpren PL6-G two-component waterless adhesive for rubber and PVC 10Kg
Sale price16.514 Ft
In stock, 29 units
Prymer Epox Wett primer 3 components to block humidity dry substrates from 6.7L+3.3L+10L Chimiver
Sale price180.769 Ft
In stock, 30 units

WB2C two-component water-based primer for water-based paint on wooden floors 5.5Lt
Sale price33.069 Ft
In stock, 30 unitsRecently viewed
Save 60%


100ML Skirting Board SOLID Wood Thin Owl's Beak 70X7
Sale price165.140 Ft
Regular price413.472 Ft
In stock, 39 unitsSave 70%


96ml of LOW SQUARED SKIRTING in WOOD FIBER 40X15 WHITE
Sale price59.202 Ft
Regular price198.251 Ft
In stock, 4 unitsSave 58%


SKIRTING BOARD Squared white lacquered solid wood 70X10 (price per LM)
Sale price2.065 Ft
Regular price4.967 Ft
In stock, 12 units