Description
HIGH POWER TWO-COMPONENT POLYURETHANE BASECOAT
FILLER
Two-component polyurethane primer with very high power
opaque, easy to apply, quick drying and excellent
sandability.
HOW TO USE:
SUBSTRATE PREPARATION
The substrate to be treated must be dry, with humidity 8 –
12%. Ambient temperature from 15 to 25°C, relative humidity not
greater than 75%. It will need to be sanded with 180 grit.
After sanding, clean the entire surface with a vacuum cleaner e
then with an antistatic cloth.
APPLICATION
Ambient and shake the product thoroughly before use.
Prepare only the amount of product needed using some
clean containers. Mix evenly with a stick
cleaned the two components (2 part comp. A + 1 part comp. B),
leave the product to pre-react for about 10 minutes. Apply to
evenly by roller or brush. After about 12 hours in CN yes
can proceed with the finishing after sanding with 180 grit e
cleaning of the entire surface with a vacuum cleaner and subsequently
with an anti-static cloth. Always check the humidity of the wood
from 8 to 12%, the ambient temperature from 15 to 25°C and the humidity
relative not exceeding 75%. Always use suitable systems
individual protection. Always consult the technical data sheet and
product safety.