Description
4 products in one - GAPFILLER Loba Stucco for floors and plinths and Glue for parquet and skirting boards, 1x310ml
HIGHLY PROFESSIONAL PRODUCT MADE IN GERMANY
€9,99 per bottle incl. VAT
All in one bottle!
PARQUET PUTTY
PARQUET GANG
SKIRTING BOARDS
GLUE FOR SKIRTING BOARDS
It can be used for painted and oiled surfaces such as wood, parquet, cork and homogeneous coatings such as PVC, CV, linoleum. For sealing joints on baseboards, door frames and roofing passages. To fill damage, knots, individual joints of parquet and fittings of radiator pipes. For gluing loose parquet slats.
- Adhesive surfaces (joint sides) must be dry, solid and free of grease and dust.
- Uncured GapFiller sealant can be washed off with water.
- Do not use for the construction of expansion joints, mechanically stressed joints and in areas with constant exposure to moisture.
Device of application / material consumption
Cartridge gun, pressure gun / Consumption is calculated from: joint width (cm) x joint depth (cm) x joint length (cm) = consumption (cm³ or ml).
drying time
- Skin formation after 30 minutes.
- Can be overpainted after 4-6 hours.
- It can be sanded after drying overnight.
Application:
- Cut the cartridge tip and inject GapFiller into the joint with a spatula gun.
- The surface can be smoothed with a wet finger or spatula.
- Possible sagging with wider joints, possibly reapply after 4-6 hours.
- During processing and drying, the temperature of the air, substrate and
- GapFiller does not fall below +5°C.
Suitable product combinations
Products suitable for after-treatment:
After drying, it can be reprocessed with all LOBA surface coatings and LOBA care products.