DILUENTE PULIPAR W is an odorless water-based cleaner
used for cleaning prefinished parquet and during installation
are soiled with one- or two-component adhesives. DILUENT
PULIPAR W is effective on partially hardened adhesives from max
6 hours (at +20°C, 60% RH). In any case it is important to intervene
before complete curing of the adhesive.
Single component cure ratio
Appearance straw yellow liquid
Application temperature +10°C ÷ +25°C
Possible dilution ready to use
Yield 20-30 g/m²
Packs 1 L
Storage stability 1 year (1)
1 in closed original containers and at temperatures between +10°C and +25°C
¤How to use
Pour DILUENTE PULIPAR W directly onto the glue. leave
act for a few seconds and rub lightly with a rag
of cotton maintaining a rotating movement.
In the case of particularly resistant adhesives it is advisable to prolong
the glue/DILUENTE PULIPAR W contact time, avoiding
to insist too much with mechanical actions, in fact the excessive
rubbing could alter the opacity of the prefinished parquet.
Any streaks can be removed using a rag
clean soaked DILUENTE PULIPAR W.
Dab any residue with a dry cloth. Make
always a preliminary test to verify the tightness of the
finish with THINNER PULIPAR W.
If the product is available in stock, the goods will be delivered within 24/48 hours.
If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.