Description
DSF is an acid-based hydrosolvent solution for cleaning hard surfaces with low absorption.
Effective stain remover used on klinker porcelain stoneware, hard and glazed ceramics, etc... Its combined action removes both grout residues and lactic binder additives for joints.
DSF is an acid-based hydrosolvent solution for cleaning hard surfaces with low absorption.
DSF is an effective stain remover used on klinker porcelain stoneware, hard and glazed ceramics, etc... Its combined action removes both grout residues and lactic binder additives for joints.
Not to be used on shiny calcareous surfaces, such as marble or surfaces that are not acid-resistant.
Advantages
- Does not give off fumes or annoying odors.
- Dissolves grout residues even in the smallest pores of the brick.
- It is effective, fast and active.
- It has a viscous consistency which allows it to adhere even to vertical surfaces.
Directions
Before starting, make sure you have everything you need to protect the operator. Shake before using. Operate at temperatures between +10°C and +30°C. Avoid applying the product on very hot supports, during strong winds or possible rain.
Always carry out preliminary tests on enamelled surfaces to verify the appropriate dilutions of the product.
Distribute the pure or diluted product on the surface and leave to act for 5-10 minutes. Then pass the single disc machine equipped with the abrasive disc, releasing water from the tank, then vacuum.
Repeat the operation if necessary. Then rinse with plenty of water and vacuum again. Protect delicate surfaces that could come into contact with the product.
BEFORE PROCEEDING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS