Ecostar 2K SANIPLUS
Two-component water-based polyurethane varnish for parquet
Ecostar 2K SANIPLUS is a two-component water-based varnish
with bactericidal efficacy. The antibacterial action of the paint
was determined in accordance with the ISO standard
22196:2007. The test, which takes into consideration the classics
bacteria responsible for infections in the home including
Escherichia coli (gram negative of faecal origin) and Staphilococcus
aureus (gram positive of cutaneous origin), showed a
reduction of the bacterial load to 98% on treated surfaces
with Ecostar 2K SANIPLUS . For this reason ECOSTAR 2K
Antibacterial is recommended in all households
and in particular in public buildings (medical practices, offices,
etc.). Finally, Ecostar 2K SANIPLUS is to all intents and purposes one
two-component water-based paint with excellent resistance guarantees
chemical and mechanical.
Catalysis ratio 10/1
Application temperature +10°C ÷ +25°C
Roller / brush application
Possible dilution DILUENTE DR H20
Yield 60-80 g/m² (*100 g/m² for ECOSTAR 2K LD)
Dust dry 30'
Out of footprint 2 h
Pot Life 2 h
Sandability 24 hours
Overpaintable without sanding 4 - 12 hours
Gloss/Opacity LD: 80 gloss (*see note ECOSTAR 2K LD),
SL: 40 gloss, OP: 20 gloss, SUPER OP: 8 gloss
Excellent chemical/physical resistance
Light wood oxidation
Storage stability 1 year
Packages 5.5 L (5+0.5)
Tool cleaning THINNER DNH 40
1 at 20°C and 65% RH
2 on 90 micron wet film hardened at 20°C and 65% RH for 7 days.
3 in closed original containers and at temperatures between +10°C and +25°C
How to use
Ecostar 2K SANIPLUS catalysed in the indicated ratio e
mixed evenly, it should be applied on the floor
wood previously filled, sanded and carefully
aspirated. In critical working conditions (high temperatures, low
humidity or large surfaces) it is recommended to add DILUENTE DR
H20 in quantities of 5-10% (see relative technical data sheet). It's possible
4 hours after application (in this case without sanding) o
after 24 hours (in this case sand with grit paper or mesh
220/320) apply the second coat of Ecostar 2K SANIPLUS .
In roller application it is essential that the paint is catalysed
is "worked" very well along the grain of the wood. If you wanted
apply a third coat of Ecostar 2K SANIPLUS, this one
must be carried out following the timing described above;
however, sanding after each coat remains advisable if
you want to get a more uniform and more superficial appearance
"soft" to the touch. To ensure prolonged efficacy in
time, it is advisable to always apply 2 final coats of ECOSTAR
2K Antibacterial. An excellent painting cycle consists of
application of 3 coats of Ecostar 2K SANIPLUS. On large surfaces
it is advisable to apply ECOPRIME HS 120 (see relevant sheet
technique) directly on wood and the following 2 coats of ECOSTAR
2K Antibacterial. The ordinary and/or extraordinary maintenance of the
floors treated with Ecostar 2K SANIPLUS must be
made with VELUREX Cleaner Star SUPER BACTERICIDAL ACTION
(see relative technical sheet).
ECOSTAR 2K LD Antibacterial.
RECOMMENDED CYCLE: apply a coat of primer (ECOPRIME HS
120 or ECOCROM or ECORAPID 1H super rapid ZCH, see relative
data sheets) and two coats of ECOSTAR 2K LD Antibacterial
(according to the methods described above) with a weight equal to
100gsm per coat. Underdosing could result in failing
achievement of 80 final glosses.
If the product is available in stock, the goods will be delivered within 24/48 hours.
If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.