Description
FLASH
Tin 10LT
Art. 504104
DESCRIPTION
One-component, very fast drying nitrocellulose-based primer for parquet.
Its drying speed makes it suitable for the creation of rapid painting cycles.
FLASH has been formulated to offer the maximum in terms of pore closure and is therefore the one-pack primer that better uniforms and limits the absorption of subsequent coats of paint.
This helps prevent any blemishes due to overly absorbent areas. CAN BE OVERPAINTED without sanding, even with one-pack water-based paints.
APPLICATION
Sand, fill with Vermeister solvent-based filler binder and carefully vacuum the wooden floor. Apply a coat of FLASH respecting the recommended quantities (80/100 g/m²). After about 30 minutes, the next coats of paint can be applied without sanding.
NOTE
DO NOT OVERPAINT WITH POLYURETHANE PAINTS.
SOLVENT-BASED SINGLE-COMPONENTS as the reaction of these can cause a strong non-homogeneous
yellowing.
Shake well before use.
Product subject to the restrictions established by Dir.2004/42/EEC