LIOS HARD WAX BIOIL 3D is a preparation based on natural oils of
vegetable origin and natural waxes that give the treated wood
a warm and velvety appearance, typical of natural oil finishes.
Its excellent impregnating power makes it ideal for treatments
directed to the wood, the second coat protects and gives depth to the
Single component cure ratio
Application temperature +10°C ÷ +25°C
Application by 6 mm roller / brush
Possible LIOS SOLV dilution
Yield 1 L / 20 m²
Dust dry 3 h (1)
Out of footprint 6 h (1)
Sandability 24 hours (1)
Gloss/Dullness SL: 45 gloss, OP: 22 gloss, SUPER
OP: < 10 gloss (2)
Good chemical/physical resistance
Storage stability 1 year (3)
Packaging 1L - 5L
Tool cleaning DILUENTE DNE
1 at 20°C and 65% RH
2 on 90 micron wet film hardened at 20°C and 65% RH for 7 days.
3 in original closed containers and at temperatures between +10°C and +25°C
¤How to use
Smooth and fill the parquet by sanding with abrasive paper
100/120 grit, then pass high pro felt for
obtain a surface able to absorb uniformly
Shake the product before use and apply one coat to
roller / brush of LIOS HARD WAX BIOIL 3D along the vein of the
Barely walkable, after 4-8 hours (depending on the temperature),
apply the second coat of product following the same
mode of the first. After 12 hours to confer greater
softness to the floor, it is recommended to felt the finish with a
It is possible that some wood essences are very rich in extractives
markedly slow down the drying process.
If you want to color the wood you can apply as before
hand one of our 16 colors from the LIOS BIOIL Colored line,
except LIOS BIOIL White (see our technical data sheets).
After 24 hours, without sanding, proceed with the two coat cycle
of LIOS HARD WAX BIOIL 3D.
Ordinary maintenance must be done with LIOS SOFTBALM
(consult the relative technical sheet).