CARPET 03
art. MO03
Bucket 16Kg
Single spreading adhesive for gluing textile floors such as carpets, felt, needle punched, etc.
HOW TO USE:
SUBSTRATE PREPARATION
Always check the humidity of the substrate with suitable instruments. The humidity measurement of the substrate must be done in depth (approx. 2-3 cm) with a carbide vial hygrometer in order to exclude the possible presence of highly hygroscopic substances (such as pumice, vermiculite), which can release the humidity contained in them resulting in swelling of the floor. Do not lay on screeds that are not protected from possible rising damp (always insert an adequate vapor-tight sheath). Cement substrates must always be treated with our ISOLATT 201/04 which promotes adequate adhesion of the adhesive (see technical data sheet). Do not lay in rooms that are not equipped with windows or closures. Do not lay if the walls and ceilings of the room are not completely dry.
APPLICATION
Ambientate the product before use. The product is ready for use, spread with a special fine-toothed trowel No. 4 on the substrate which must be compact, dry, clean, free from detaching parts such as wall paint residues, powders, waxes or the like. The application of the adhesive must be done in small areas to avoid the formation of a surface film before laying. Lay the covering by exerting uniform pressure on the entire surface in order to let out any air bubbles. The product must not be diluted. Before gluing, always check the humidity of the screed which must be <2% (<0.5% anhydrite). Room temperature from 15 to 25°C, relative humidity not exceeding 75%. Always use protective gloves and mask. Always consult the technical and safety data sheet of the product.
SPECIFIC CHARACTERISTICS :
Appearance: Pasty
Viscosity (@20°C; Brookfield): 5000 – 50000
Yield (g/m2): 400 – 600
Workability time (minutes): 15 – 20
Use temperature (°C): +15 - +25
Walkability (hours): 6 – 8
Final hardening (days): 3 – 4
Application/Tools: No. 5 fine-toothed trowel
Tool cleaning: SE, with the product still fresh
Product removal: PULITORE PR, with the product still fresh
Storage (months): 6
temperature between +5°C and +25°C
Disposal information Dispose of in accordance with applicable local and national regulations
Packaging: 16 kg bucket
Restrictions on use: Flammable product Always use adequate individual protection systems Ventilate the room during installation, however avoiding drafts Do not apply in damp rooms Set the product and materials at 20°C before application
