¤Description
Mixture of aggressive solvents and paraffins suitable for removal
of old layers of glue or paint.
¤Features
Application temperature +10°C ÷ +25°C
Colorless
Application brush, spatula
Yield 400-500 g/m²
Storage stability 1 year (1)
Packaging 5 Lt - 12.5 Lt
1 in closed original containers and at temperatures between +10°C and +25°C
¤How to use
MOVER CM 2011 is a specific product suitable for the removal of
old layers of glue or paint. Apply with a spatula or brush on
small surfaces a quantity equal to about 500 g/m2 if possible
avoiding to operate in drafts; wait 10-15 minutes
and remove the gelatinous mass with a toothless spatula or
scraper.
In the most difficult cases, repeat the operation. During and after
the use of MOVER CM 2011 keep the
container.
If the subsequent treatment is the laying of glued parquet is
recommended to wash the stripped surface with DILUENTE DNE
to remove the paraffin residues that could affect
membership.
Note
It is not recommended for use on floors with a system of
heating/cooling.
Before proceeding to draft the MOVER CM 2011, it is
It is essential to make sure that the substrate is isolated from the slab
with a nylon sheet or with a waterproof mattress and moreover
that the cement screed (subfloor) does not contain materials
of lightening capable of retaining solvents.
¤Warnings
When handling and using the product, observe
strictly to the rules of behavior they characterize
the use of dangerous products (use gloves, mask, goggles, etc.).
CONSULT THE SAFETY DATA SHEET.
