Description
PRYMAREN
Single-component water-based acrylic primer for microcements
¤Description
PRYMAREN is a single component sealant based on acrylic
non-yellowing resins in water dispersion suitable for
preparation of microcements before subsequent painting
with products from the ECOSTAR 2K ANTIBACTERIAL line for
Resin floors. Thanks to its special formulation
PRYMAREN improves the adhesion of base finishing varnishes
aqueous on micro-cements and mineral substrates, increasing their properties
resistance to alkaline substrates and water. The properties of not
yellowness and high reticulation recommend its use on both
light and dark micro-cements.
¤Features
Single component cure ratio
Application temperature +10°C ÷ +25°C
Application by 8 mm roller / brush
Possible dilution 10-20% water
Yield 70-80 g/m²
Overpaintable without
sanding
2-3 hours (1)
Total drying 12-24 hours (1)
Pot Life na
Storage stability 1 year (2)
5 L packs
Water tool cleaning (when the primer is fresh)
1 at 20°C and 65% RH
2 in closed original containers and at temperatures between +10°C and +25°C
¤How to use
The laying surface must be perfectly hardened,
structurally sound, dry, clean and free from fats and waxes.
In case of old or previously treated floors, wash
carefully the surface with VELUREX DEWACHS (see
relevant technical sheet).
High porosity microcements.
In the presence of healthy substrates, apply a first coat of
PRYMAREN diluted with 20% of water and proceed after about 2
hours, when the surface can be walked on and within 8 hours, with
applying the second coat of undiluted product.
Then proceed with the subsequent painting with products from
ECOSTAR 2K ANTIBACTERIAL line for Resin Floors (see
relative technical data sheet) after about 2-3 hours and within 8 hours.
Microcements with reduced porosity.
In the presence of healthy substrates, apply a single coat of
PRYMAREN diluted with 10% water.
Then proceed with the subsequent painting with products from
ECOSTAR 2K ANTIBACTERIAL line for Resin Floors (see
relative technical data sheet) after about 2-3 hours and within 8 hours.
Membership promoter.
It is possible to apply PRYMAREN between coats
of microcement to improve adhesion and power
waterproofing.
Note
Follow the manufacturer's application times
microcements.
Wait for the complete maturation of the microcement first
application of PRYMAREN, it is advisable to plan the work
so as not to exceed 8 hours between coats of product
apply, otherwise it is necessary to roughen the first coat
of PRYMAREN already applied.
If the product is available in stock, the goods will be delivered within 24/48 hours.
If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.