Description
PRYMER 100
Quick drying, odorless polyurethane primer
¤Description
PRYMER 100 is a single component polyurethane primer
moisture-hardening, fast drying suitable as an anti-dust,
surface consolidation and vapor barrier of screeds
cementitious. PRYMER 100 is suitable as a dust remover on screeds
in anhydrite and with heating and cooling system
radiant.
¤Features
Curing ratio one component (ready to use)
Application temperature +10°C ÷ +25°C
6mm roller / brush application
Possible dilution DILUENTE DMC 50
Yield 120 - 450 g/m² depending on
background and employment.
Hardening 4-5 hours (1)
Storage stability 9 months (2)
Packaging 6L - 12L
Tool cleaning DILUENTE DNE
1 at 20°C and 50% RH
2 in closed original containers and at temperatures between +10°C and +25°C
¤How to use
Restoration of lean or dusting substrates
Vacuum the substrate dust very well. Apply one
coat of PRYMER 100 with a 6mm roller or a 3x13cm flat brush
or 4x14cm, in quantities equal to approximately 120 ÷ 150 gr/m² on a regular basis
and uniform. Absolutely avoid accumulations of product in the
deep subsurface cracks, otherwise total hardening
of the product itself will be drastically stretched with formations
of fragile non-stick films that alter the hardening of the
reactive glues until their complete catalysis is inhibited.
After 4-5 hours proceed with the laying of parquet using
only reactive adhesives: UNISIL, Adesiver ELASTIC, Adesiver
327 PU, Adhesive Hercules, Adhesive 501 EP, SIGOL.
In case you have to carry out subsequent smoothing with products
self-leveling or if parquet is expected to be laid in times
longer than those mentioned above, sprinkle with QUARTZ (0.8
mm ÷ 1.2 mm) the entire surface treated with primer again
fresh. Before applying the self-leveling compound or adhesive,
previously vacuum the sand not incorporated in the primer.
If the sandblasting operation is not carried out, it is necessary
vigorous sanding with coarse grain (36-40) before
drafting of levelers or adhesives.
Do not pour the product into the original container if necessary
advanced!
Vapor barrier
PRYMER 100 performs a good "vapour barrier" action on
substrates with residual humidity up to 5% with the carbide method
for screed thicknesses of 6 cm.
Thoroughly vacuum the residual dust from the substrate. To apply
the first coat of PRYMER 100 with a 6mm roller or flat brush
3x13cm or 4x14cm, in a regular and uniform way in quantity
equal to about 120-150 gr/m², absolutely avoiding accumulations
of product in the deep crazing of the substrate, otherwise
the total hardening of the product itself will be drastically
stretched with non-stick brittle film formations that
alter the hardening of the reactive glues.
After about 4-5 hours, apply a second coat of PRYMER
100 in the same way as before. Within the next 24 hours
proceed with the installation of parquet using only adhesives
reagents: UNISIL, Adesiver ELASTIC, Adesiver 327 PU, Adesiver
Hercules, Adhesive 501 EP, SIGOL.
If exposure times beyond 24 hours are expected, it is necessary
apply a third coat of PRYMER 100 and sprinkle with
QUARTZ (0,8 mm ÷ 1,2 mm) the entire surface treated with primer
still fresh. When applying the adhesive vacuum
beforehand the unalloyed quartz.
NB Anhydrite substrates and non-heating substrates
can be waterproofed.
If the product is available in stock, the goods will be delivered within 24/48 hours.
If the product is not available in stock, the goods will be delivered within a maximum of 15 working days.
Estimate shipping
Domande e Risposte
Hai una domanda?
Fai una domanda su questo prodotto.
They might interest you

Prymer Fast 500 single component solvent free primer 6-12Lt Chimiver
Sale priceFrom €166,89
In stock, 58 units
Prymer A one-pack primer for low absorbent substrates 10L Chimiver tin
Sale price€85,40
In stock, 29 units
Prymer Pub 77 primer for vapor barriers and restoration of concrete slabs 5L - 12.5L Chimiver
Sale priceFrom €107,36
In stock, 58 units
Prymer W anti-dust primer suitable for irregular substrates 5-10-25L Chimiver
Sale priceFrom €68,32
In stock, 90 units
Prymer Epox Wett primer 3 components to block humidity dry substrates from 6.7L+3.3L+10L Chimiver
Sale price€436,76
In stock, 30 units
Adesiver Re 400/N adhesive for carpets and needle punched fabrics 12-20Lt
Sale priceFrom €106,87
In stock, 60 units
Prymer SF 1105 A+B two-component epoxy primer blocks humidity 2 cans of 10L Chimiver
Sale price€488,00
In stock, 29 units
Prymer OP primer adhesion promoter for PVC plastic surfaces 5L Chimiver tin
Sale price€281,21
In stock, 30 units
Chim tabu prymer one-component primer for parquet 12.5 Lt Chimiver
Sale price€320,25
In stock, 30 units
Unisil Outdoor Pu polyurethane adhesive for interiors and exteriors 600ml
Sale price€22,00
In stock, 30 unitsRecently viewed

Chimigrip acrylic one-component adhesion promoter for inside 5L Chimiver bucket
Sale price€73,81
In stock, 28 units
Rasochim AL / Niveland 10R cementitious self-levelling compound thickness up to 10mm 5 bags of 25 Kg Chimiver
Sale price€289,75
In stock, 30 unitsSave 43%


Ashlar frame for Boiserie wall cladding in polymers 30x30cm White already assembled
Sale price€7,99
Regular price€13,90
In stock, 11 units
Rasochim Maxi self-leveling fast hardening thicknesses from 10 to 30mm 5 bags of 25Kg Chimiver
Sale price€347,70
In stock, 30 units