¤Description
PRYMER A is a single component dispersion primer
ready-to-use aqueous solution based on a nanodispersion of resins
high penetration even on poorly absorbent substrates.
PRYMER A is indicated as an anti-dusting treatment e
surface consolidation of absorbent cement substrates,
cementitious and anhydrite smoothing. Also suitable for substrates
with heating and cooling system. Allows
the subsequent gluing with reactive adhesives. ¤ Uses:
dustproof, surface consolidation for internal use.
¤Features
Single component cure ratio
Application temperature +10°C ÷ +25°C
Application by 8 mm roller / brush
Possible water dilution
Yield 100 g/m²
Total drying 3-4 hours (depending on the quantity
applied and the absorption of
background)
(1)
Storage stability 1 year (2)
Packs 10 kg
Water tools cleaning (with fresh product)
1 at 20°C and 65% RH
2 in closed original containers and at temperatures between +10°C and +25°C
¤How to use
Dusting substrate consolidator
It is essential to ensure that there is no rising damp
from the background. The substrate on which it is to be applied
PRYMER A must be clean, free from release agents e
free of cracks. Apply PRYMER A to the substrate using
a roller, evenly avoiding accumulations, wait for the
its complete drying and proceed to the subsequent laying of
wooden floors using only reactive adhesives:ADESIVER 501
EP, ADESIVER HERCULES, SIGOL, ADESIVER 327 PU, ADESIVER RE
702, UNISIL, ELASTIC (see relative technical data sheets).
