Description
EXPANSION POLYURETHANE HYGRO-CURING RESIN
It can be used both before and after sanding
parquet for small repairs of strips not perfectly
glued to the background.
SUBSTRATE PREPARATION
Make a small hole in the tablet at the
place where it is not firmly glued.
APPLICATION
Ambientate the product before use. Inject 2-3 drops
of water under the wooden elements to be fixed, possibly in
junction match. After 2 minutes inject on
same point a small dose of ADEGLOSS 10. Be careful
not to put an excessive amount of ADEGLOSS 10 because
during the hardening phase it swells and increases
excessive volume. ADEGLOSS 10 is a product that
adheres to the paint tenaciously. Before gluing
always check the humidity of the screed which must be <2%
(<0.5% anhydrite). Ambient temperature from 15 to 25°C, humidity
relative not exceeding 75%. Always use suitable systems
individual protection. Always consult the technical data sheet and
product safety.
NOTE
With this swelling characteristic ADEGLOSS 10 goes to
fill in the voids by also solidly fixing the nearby tablets
to the defective area. Immediately close the container a
once opened as the product hardens with humidity
of the air. Never use wet containers.
Estimate shipping
Domande e Risposte
Hai una domanda?
Fai una domanda su questo prodotto.
They might interest you
REVIN X Glue Single-component vinyl adhesive 10kg PARQUET Vermeister
Sale price€39,90
In stock, 14 units
Parquet Pronto Rapid Polyurethane adhesive for small quick repairs
Sale price€18,99
In stock, 10 units
REPOX Two-component epoxy-polyurethane adhesive (9+1) Vermeister
Sale price€49,00
In stock, 91 units
Adecon K450 glue 12 pieces of 0.5Kg vinyl adhesive for parquet tapping
Sale price€71,88
In stock, 24 units
Adesiver Elastic silane glue for parquet and planks 15Kg bucket
Sale price€122,00
In stock, 20 units