Description
Silostone H-14 is a stain-resistant protector for internal and external stone and terracotta
Comprehensive for the protection of stones and stone materials in general which demonstrate high porosity. It gives the products hydro-oil-repellent properties without altering the surface appearance.
Silostone H-14 is a binder for the protection of stones and stone materials in general that demonstrate high porosity.
Silostone H-14 gives the products hydro-oil-repellent properties without altering the surface appearance.
Advantages
- Ready for use.
- High penetration capacity.
- Excellent water-oil repellent properties.
- Exceptional resistance to repeated washing.
- Excellent resistance to abrasion.
- Does not alter the appearance and tone of the artefact.
- It does not emit harmful substances either during application or after.
- It is a protective agent with an aqueous vehicle.
Directions
Mix well before and during use. Operate at temperatures between +15°C and +30°C. Avoid applying the product on very hot supports, during strong winds or possible rain.
With the surface clean and dry, spread a first coat of Silostone H-14 with the help of a brush or, if applied on the floor, with a wax spreader. Leave to dry. After approximately 1-2 hours, apply a second hand in the same way.
ATTENTION: on materials with a calcareous composition it does not guarantee the protection of substances with an acidic pH.
On internal floors, to facilitate maintenance, we recommend applying 2 coats of Sintesi 3/P special wax (see data sheet) at intervals of approximately 2 hours between one coat and the other.
ORDINARY MAINTENANCE: for each wash use Mistrall or Oil & Clean (see sheets).
EXTRAORDINARY MAINTENANCE: approximately once every 1-2 years with Cottolux, if it concerns internal surfaces, or Neocot, if it concerns external surfaces (see sheets).
BEFORE PROCEEDING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS