SUPERFOND SK1
art. SUFO
Can 10L + 10L
HIGH COVERAGE TWO-COMPONENT POLYURETHANE BASECOAT
Fast drying two-component polyurethane primer with excellent sandability, suitable for quality finishes in a short time.
HOW TO USE:
SUBSTRATE PREPARATION
The substrate to be treated must be dry, with humidity of 7 – 11%. Room temperature from 15 to 25°C, relative humidity not exceeding 75%. It must be sanded with 180 grit. After sanding, clean the entire surface with a vacuum cleaner and then with an antistatic cloth.
APPLICATION
Ambient and shake the product thoroughly before use. Prepare only the amount of product needed using clean containers. Mix the two components homogeneously with a clean stick (1 part comp. A + 1 part comp. B), leave the product to pre-react for about 10 minutes. Filter the product. Apply evenly with a roller or brush. After about 12 hours at NC you can proceed with the finish with RELUX (see technical data sheet) after sanding with 180 grit and cleaning the entire surface with a vacuum cleaner and then with an antistatic cloth. Always check the humidity of the wood from 8 to 12%, the room temperature from 15 to 25°C and the relative humidity not exceeding 75%. Always use adequate individual protection systems. Always consult the technical and safety data sheet of the product.
SPECIFIC CHARACTERISTICS :
Appearance: amber liquid
Viscosity (@20°C; Ford #4): 18 – 20
Catalysis ratio (A:B): 1:1
Duration of the mixture (hours): 2
Yield (g/m2): 80 – 100
Dust free (min): 30 – 40
Use temperature (°C): +15 - +25
Walkable (hours): 10 – 12
Application/Tools: roller, brush
Tool cleaning: SE, with the product still fresh
Packaging: Overall package of 10 l (5 l comp. A + 5 l comp. B) Overall package of 20 l (10 l comp. A + 10 l comp. B)
Storage (months): 6
temperature between +5°C and +25°C
Restrictions on use: Flammable Ventilate the room while applying, avoiding draughts Always use adequate individual protection systems Do not apply in humid environments Set the product at 20°C before application Solvent-based
