Neocot protective finishing wax for interiors and exteriors reinforces stain-resistant properties

Save 18%
NewChemicalSKU: Neocot
No reviews
Shipping in 20 business days

Price:
Sale price€25,60 Regular price€31,23

Tax included Shipping calculated at checkout

Stock:
In stock (100 units), ready to be shipped
Bottle
Notify me when available
Area Required

Description

Neocot protective finishing wax for interiors and exteriors reinforces stain-resistant properties

It adds a shiny appearance to the product and at the same time strengthens the stain-resistant properties, guaranteeing longer-lasting basic protection.

NEOCOT is a water-based finish that gives the product a shiny appearance and, at the same time, strengthens the stain-resistant properties, prolonging the life of the basic protection. Can be used as a finish and maintainer after the external impregnating treatment, it simplifies maintenance operations.

NEOCOT completes and increases the stain-proof protection of external surfaces. Ideal for terracotta, terracotta, clinker, concrete, non-polished natural stone and rough surface stoneware.

IMPORTANT: For ordinary cleaning, avoid alcohol, acidic, solvent or ammonia detergents.

IMPORTANT: Always check whether the manufacturers of the materials advise against the use of the product before use.

Advantages

  • Simple to clean.
  • Prolongs the duration of treatment.
  • Greater resistance to water and oils.
  • Easy to apply.
  • It guarantees a pleasant shiny appearance.
  • Uniform results.
  • Does not contain harmful substances during or after application.
  • Pleasantly scented.
  • Dries quickly.
  • Protects against damage caused by freeze and thaw cycles.

Directions

Shake before use. Apply at temperatures between +10°C and +30°C, avoiding very hot surfaces, strong winds or imminent rain.

SOME EXAMPLES OF TREATMENT:
1) After the Follet-C impregnator, apply 1-2 coats of NEOCOT.
2) After the Kripton HS impregnator, apply 1 -2 coats of NEOCOT.

After checking that the surfaces treated with the basic products are dry and uniform (about 2 hours later), apply a first coat of NEOCOT evenly with a wax spreader or a cotton cloth with brush. Leave to dry for 1-2 hours and, if necessary, apply a second hand in the same way.

For raw porcelain stoneware, apply directly without base primers, following the same methods.

If you want a less shiny finish, you can mix it with Follet-C (see sheet) up to a maximum ratio of 1:1.

As an extraordinary maintainer, it is recommended to apply it every 8-12 months. For more frequent maintenance, dilute it up to 50% in water.

For ordinary maintenance, use Mistrall (see data sheet) diluted 1-2% in water for each wash. After treatment, protect from water and bad weather for at least 24 hours.

BEFORE APPLYING ON THE ENTIRE SURFACE, ALWAYS CARRY OUT TESTS.


TECHNICAL SHEET

Estimate shipping

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

They might interest you

Recently viewed